Description

• Regular Size: 1220*2440mm, 1560*3050mm, 2050*3050mm
• Thickness: 1~32mm
• Weight/Volume: 0.35~0.7g/cm³
• Heating Temperature: 70℃~120℃
• Bending Strength: 4.56mpa

PVC foam board, also known as Chevron board or Andy board, is a lightweight, eco-friendly alternative to wood and steel. Made from polyvinyl chloride (PVC), it comes in three main types: free-foaming, co-extrusion foaming, and crusted foaming.

PVC foam board offers a range of benefits, including:

• Lightweight: Easy to transport and install.
• Durable: Impact-resistant, flame-retardant, and weatherproof.
• Versatile: Can be shaped, fabricated, and printed for various applications.

Common uses include:

• Construction: Interior panels, wall partitions, and ceilings.
• Advertising & Signage: Displays, signs, and exhibits.
• Other Applications: Furniture components, thermoformed parts, and art materials.

 

How to cut PVC sheets?

Polyvinyl Chloride (PVC) sheets are a favorite among DIYers, contractors, and crafters for their durability, chemical resistance, and versatility. Whether you are installing wall cladding or building a custom prototype, knowing how to cut this material cleanly is essential for a professional finish.

The good news? You likely already have the tools you need in your workshop. Here is your guide to getting the perfect cut every time.

Safety First

Before you begin, always prioritize safety.

• Wear safety goggles to protect against flying plastic chips.
• Use a dust mask if using power saws, as cutting PVC can generate fine dust.
• Work in a ventilated area.

Option 1: The Score-and-Snap (For Thin Sheets under 3mm)

For thinner PVC or foam PVC, you don’t need heavy machinery. A simple utility knife offers the cleanest control.

Tools Needed: Heavy-duty utility knife, metal straight edge/ruler, clamps.

1.   Measure and Mark: Draw your cut line clearly on the sheet.
2.  Secure the Sheet: Clamp the PVC sheet to your workbench so it doesn’t slide.
3.  Guide the Blade: Place your metal straight edge along the cut line.
4.  Score Deeply: Run the knife along the straight edge. Do not try to cut through in one pass. Apply firm pressure to create a deep groove. Repeat this 3–4 times until you are about halfway through the material.
5.  Snap It: Move the sheet so the scored line aligns with the edge of your table. Apply quick, downward pressure on the overhanging piece. It should snap cleanly along the line.

Option 2: Power Saws (For Thick Sheets 4mm+)

For thicker rigid PVC, power tools are efficient, but heat management is key. Friction can cause the PVC to melt and bind to the blade if you aren’t careful.

Tools Needed: Jigsaw (for curves) or Circular Saw (for straight lines), fine-toothed blade.

1.  Choose the Right Blade: This is the most critical step. Use a blade designed for plastic or metal (10–14 teeth per inch). Avoid coarse wood blades, which can shatter the plastic.
2.  Support the Material: Ensure the sheet is fully supported to reduce vibration, which can cause cracking.
3.  Cut Cool: Run your saw at a moderate speed. If the blade spins too fast, the friction will melt the plastic. Move the saw steadily through the material—do not force it.
4.  Cool Down: If making long cuts, pause occasionally to let the blade cool down.

The Finishing Touch: Smoothing the Edges

Regardless of the option used, you may have rough or sharp edges.

• Sandpaper: Use 120-grit to remove large burrs and finish with 220-grit for a smooth edge.
• Deburring Tool: For a factory-style finish, run a deburring tool along the cut edge.

Ready to Start Your Project?

Now that you have the know-how, you need the materials. Contact us to get the high-quality PVC Sheets available in various thicknesses and colors to suit your specific needs.